Infinity Flow S1 mount for Qidi Plus 4 riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Infinity Flow S1 mount for Qidi Plus 4 riser
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 2
- Makes
- 0
- Views
- 75
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Mounts an Infinity Flow S1 (may work with S1+ also) to the side of the "Qidi Plus 4 Riser with Sunlu and Vent Stand". Print 2 brackets and mount one to each side using a pair of 3x10 machine screws. Most any filament and reasonable process settings should be fine. If anyone finds that it doesn't work with the S1+ (it probably does) let me know.
A hole is drilled through the side of the riser to allow a PTFE tube to pass into the print chamber. I use a coupler just inside and can swap the internal PTFE tube between the Infinity Flow input and the standard tangled filament sensor input. I found that the filament tangle sensor would cause jamming during spool change-over. As the filament cutters on the Infinity Flow solve tangles through a preferable method, the tangle sensor is not needed when using the Infinity Flow.
I also use this with the "Infinity Flow S1 cutter rigid mount".
https://infinityflow3d.com/products/s1-plus-automatic-filament-loader