xtool Omni O1 small plate jig
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple jig for the small plate of xtool Omni O1 UV printer to align objects in parallel with the sides of the plate.
- Ocena
- 0 / 5
- Polubienia
- 10
- Pobrania
- 132
- Wydruki
- 0
- Wyświetlenia
- 891
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Ideas
- Licencja
- Creative Commons — Attribution
I just wanted a very simple jig for the xtool Omni O1 UV printer that will allow items to be placed in parallel with the sides of the small plate. When a print image needs to be aligned with the item it is being printed on, this helps to place the item in line with the vertical or horizontal edge of the plate. It can be left on during printing but can also be taken off easily.
Prints face down to avoid supports being needed. It is not the full length of the small plate (but close) because the full length is just a little to wide to fit on my Bambu H2S printer and I didn't want to alter the shape and deal with gluing two parts together.