Liczymy pasujące modele…
Socket holder gridfinity bin for phillips head no1 to no4, 1/4" drive ratchet. The socket holder uses a gridfinity 1x2 bin. It's made for phillips screw drive no1, no2, no3 and no4. Print it with 10% gyroid infill, no support. You can…
Hair clippers normally have combs that only go up to No8 (25mm). I require something longer, so I have created No10 (notionally 28mm) and No12 (notionally 34mm) ‘extension sleeves’. These fit over a Wahl No3 ‘donor’ comb (that takes care…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A little box to reuse PCO1810 caps (soda bottles cap). Only 1.6 grs of plastic about 0.5m. Print in vase mode in less than 10 minutes.
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
clip for attachment of the Ooono Co-Driver to your car's sun visor
Holder for Festool RO150 sander OR any 150 mm sander with hook for hanging power cable. Download 1 of 3 different texts Festool RO150 Festool 150mm 150 mm Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…
Makita DVC750L vacuum adaptor for Makita DBO180
Like it? Support me. Website: https://pixelglance.com Buy Models: https://cults3d.com/en/users/PixelGlance Summary This is Vertical Bracket for watercooled GPUs, and is perfectly fitted for the Lian-Li O11DXL-X PC Case. But it has also…
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
Overview Building on a previous design (Brio - Mechanical (Geared) Interchange/Switch - M1 Track) https://www.prusaprinters.org/prints/59955-brio-mechanical-geared-interchangeswitch-m1-track I wanted to see if I could shrink the design…
I needed a desiccant container that was both small and strong enough to throw into an ammo can with bulk loose ammo. There are many desiccant containers but most are either too fragile or designed for certain dimensions that did not meet…
On the right side of the Lian Li 011 XL, there is a spot for 3x 120mm fans. After initially assembling, I noticed that all of the wires ran through this location and blocked a lot of airflow. I created this fan duct to almost make contact…
A sunvisor clip for the OOONO CO-DRIVER NO1. Inspired by @nyknyc 's design . It secures the CO-DRIVER NO1 with a friction locking case. Printing Instructions: I printed both parts out of PLA (Maybe use something more heat resistant…
Apollo 11 in 3 parts (shell, inside, top) Apollo11.stl is the shell+inside joined together without top. Apollowhole is just for viewing. Cleaned, solidified, and made printable from Smithsonian 3d scan found on sketchfab. Category:…
I created this STL to help fit my Asus Ryujin ii 360mm radiator in the top of my Lian Li O11D Mini case. By default, this case is not made to support that large of a radiator on top. Lian Li sells a bracket kit to do this very thing but…
A simple wall mount for my 125mm exenter sander. Probably will work for other 125mm units as long as they are not too heavy. Feel free to leave a like or make if you like it! Category: Hobby
Loved this when i saw the picture. It lives in the Railway Museum in York, but 5" scale models are to be found in Brighton, Exmouth and Worthing according to Wikipedia. A tender will follow as and when. Tender now included. The mid sized…
I didn't want to stick the OOONO in the car with double-sided tape. That's why I drew a clip for the sunvisor with and without car brands. The advantage of this postion is when the OOONO is directly at head height you don't miss the alarm…
Stanley Knife N°199 comes without any protection, so I made my own belt holster. I have done several iterations, but v5 works by far the best. Designed in Onshape:…
This print allows for an O11 Dynamic XL case to be lifted 55mm of the ground. It fits over the existing feet without modifications. The design of the feet allows for just printing the design four times without mirroring. Printed with 20%…
I needed to make something to attach to a PET bottle and couldn't find a model file to import into FreeCAD. So here's one. The model is not really useful for anything (unless you desperately wish to have a ring screwed on top of your PET…
Supports: Yes Resolution: Dynamic Infill: 50% line Filament brand: 195 Filament material: PLA The Mercedes Benz No. 1, built in 1886, marks the inception, An iconic vehicle in automotive history's collection. Crafted by Karl Benz, it…
Salut, Cet adaptateur permet de raccorder une Festool Rotex RO150 ancien modèle vers un aspirateur D36 non flexible.
Glass spacer for the Lian Li pc-o11-Dynamic. This design was created to all for horizontal mounting of 3000 GPU's in the Lian Li pc-o11-Dynamic with a water block. Hope it can help someone out! Print Settings Printer Brand: Prusa Printer:…
I remixed this to put it in the O11 Dynamic non XL version. Now there are two fans channeled together in a single duct. The height is matching if you put the fans on the backside of the mounting point of the case (the side with the PSU…
There's a couple commercial options for an airflow focused panel for the o11 Dynamic XL, but they're expensive. Other panels I could find are all for the o11 evo or standard. So I made this, it's designed to fit on a CR10 or similar sized…
DIY IR Turret V2.0 - Inspired by CrunchLabs' HackPack This is the SECOND version of my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits…
Little part to fit a plastic bottle to an airsoft gun or airgun - files threaded for the standard airsoft M14 x 1.0 LH ("14mm CCW") fitting and airgun 1/2-20 UNF standard are included. This is to make a prop. While a big bottle has a…
IF YOU MISS SOMETHING - LOOK in the original V1 package. There are multiple Helix Holders, multiple bend helper for different diameter and so on. I dont wanted to just copy everything here. So, now to the V2: Hi, this is the V2 version of…
Remixed this to replace the original storage that came with the GoPro. This fits GoPro with silicone cover Also added my .3mf files to print if you have a Bambu X1C, or you can just check my PETG settings as i use this for all my boxes…
Higher Feet for O11 Air Mini for improved Airflow. You need 1 set of mirrored and 1 set of regular feet each (Yes the long one is the same for mirrored and regular version ;) ).
Don't want to suck hot carpeted air, dust and dirt into your expensive GPU and case? Want cooler temps and higher airflow? Use these ducts to pull air in from beside the case not directly and immediately beneath it. Position them pointing…
Enclosure for DSO138 digital oscilloscope
Simple Enclosure for the DSO138 oszilloscope.
This is a custom parts set for soozafone's LUCKY 13 figure, inspired by Kamen Rider Kabuto. The plan is to make a full armor set, so more pieces will be added as they're completed. This parts set is intended for 200% scale - some details,…
I wrote an article with testing results about this: https://www.igorslab.de/en/o11d-hdd-cooler-2 This is a Remix of Thingi 4923606, but made to fit the regular O11 Dynamic and not the XL Version. Two 60x25mm fans fit inside, I suggest…
I made theses wheels to complete the Porsche GT3 RS 992 Silhouette Wall Art by pino 1021 They can also be used for others Porsche 911 silhouettes, or even other cars if you want. Print I suggest printing them at the lowest resolution your…
This is a magnetic cover for Lian Li O11 mini. Neet to use 20x3mm magnets, use hot glue. If you need something ask :)
Set of nozzle for the handheld fan Jisulife Pro1S. They provide them for the Ultra1 but not the others models so I made them. Flat beak like an air dryer Cone nozzle to concentrate the airflow Inverted cone to widen the area of effect The…
No support needed. Infill 20% recommended. If the inner part sits too loose just put some normal tape around it to increase friction or scale it up a bit.
Holder for cordless orbit sander like Makita DBO180Z Print Settings Printer: Artillery Sidewinder X2 Rafts: No Supports: No Resolution: 0,2 Infill: 20 Filament: Extrudr PLA NX2 turqoise Category: Other
This is a mobile phone case for the Fxtec Pro1 and Pro1x models. There are slight differences between the two. USB and fingerprint reader locations. Screen protection is the same on both. It features a small lip around the edge to match…
Made texts a solid so you can print it on a MMU printer. You can also print it on a regular printer but you would need to make a few manual filament changes. (set your printer to multiple extruders, slice it like for mmu and put M600 to…
This is simple and durable adapter for connection between Karcher WD2 (maybe other model) and Makita DBO180 model. Fit is tight to prevent falling off while you are generating some work. No support 0,2 layer Nozzle temp 210 Thanks and BR
Suggest 5-6 walls, 3mm+ top/bottom layers. Infill is moot if your shells are thick enough, so use whatever gives you good results. Supports needed for the holes
An enclosure for the DSO138 oscilloscope with room for a 9V battery. Print Settings Printer: TronXY X5S Rafts: No Supports: Yes Resolution: 0.25 Infill: 15% Filament: Generic PLA Any Category: Electronics
Remix from: https://www.thingiverse.com/thing:4852112 Made the model whole and added text. This holds the Rotex 125 and provides support for its heavy body, the support itself is in the shape of "U" to hold the power cord. Reccomend…
I wanted a way to hold my headphones near my PC while not in use. After trying several designs, I ended up desiging this. Pretty Happy with the result. It works very well.
Extended case feet for the O11D to promote airflow. 47mm tall, about twice as tall as the stock feet. Reuses the original (6x) fasteners and (4x) rubber feet. Printed in ABS, .6mm nozzle, with no supports, with the case mating surface…
Double-sided curved switching track compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2 Mini…
I've adjusted the text and cleared the calibration hole. Nice case though, thanks! Category: Electronics
Replacement fader knob for the Yamaha O1V96 digital mixing console
This is a case to cover the sides and back of the Zeeweii DSO154Pro portable oscilloscope. It's meant to be pressure-fit, so you may need to adjust dimensions by 0.1 or 0.2mm depending on your printer's tolerances. There's also a small…
MAKITA Adapter Vacuum- Makita DBO180Z cordless orbital sander 18 V Category: Tools
DIY IR Turret - Inspired by CrunchLabs' HackPack This is my own 3D-printable version of the IR Turret inspired by CrunchLabs' HackPack. I built this project as a personal challenge after realizing the kits weren’t available in my country…
4 separate risers included in file. Fit under the existing case legs and front IO module (in standard orientation.) Printed in PLA 0.32mm layer height 0.96 wall thickness 20% infill
Added PCO1881 bottle threads to the existing bottle hole to eliminate post-processing needs from the original design. EDIT: Rotated the original version so it lays flat on the bed by default and added a blunted version so it can be…
Many thanks for Yanev for making such a grat box! Hovewer, after trying to customize it to fit FNIRSI DSO152, it occured to me, that minimal height of the bottom and the lid are 15mm each, a little to much for that small oscilloscope. But…
There are 2 funnels here one small and one bigger. I needed a way to refill bottles with one hand so this twist on with half a turn and is extremely sturdy. it is also stepped to be able to go over the other rings of the bottle. works on…
Lian-Li O11 Dynamic Mini Panel Spacers created to space out side panel approximately 0.5in from case frame. Created for side panel although you can print out the top holder 4x to space out the front panel as well.…
I made this model for Lian Li O11 Dynamic. For whatever reason, my cable grommets fell apart after a few years, so i needed to create replacement. Not sure if it fits any other model. This is a TPU print. I printed mine with: Sunlu 95a…
EleLab_v2 DSO138 For general information and building instructions about this project please see the Github repo ! Also check out the collection of the whole EleLab system here ! The EleLab system is a low cost, modular elctronics lab…
Das ist ein Saugstutzen für den Exzenterschleifer RO150E von Festool.
So yeah, troubleshooting random crashes, short version, removed all the vertical graphics card hardware (didn't solve the problem) and wanted something to fill the empty slots that wasn't using all the screws and kept dust out a bit…
Created a clip to mount my GoPro Hero11 Mini to my backpack and weighted vest.
full files: https://www.etsy.com/listing/1673445145/zs-o1-endgame-gear-op1-inspired-3d assembly instructions for full mouse: https://docs.google.com/document/d/1CEqZDQMqfhigdJQ8UTBbVbg6YFxBtL2ifgjq7VNZr4E/edit twitter:…
With this simple coupler you will be able to connect any male threaded ¾ inch part to the receiving vessel of a Fermzilla fermenter (https://www.kegland.com.au/kegland-fermzilla-conical-27l-uni-tank.html). I modeled this because I needed…
Hi there, i designed a cover for the cable management Case: Lian Li O11 dynamic XL Support: From build platform only!! Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: Doesn't Matter Supports: No Resolution: 0.15 Infill:…
By default, the filter is placed very close to the panel, reducing airflow and increasing noise. This spacer mounts on the existing pins/slots without requiring any glue / adhesive, and adds 6mm of clearance. The model is actually split…
Sturdy version of http://www.thingiverse.com/thing:779159 . Walls thicker. Battery compartment for 8x AA batteries (lasts longer then a 9v cell, use rechargeable batteries to not exceed the 12v max). Foldable legs. Reset button is flush…
I just wanted a very simple jig for the xtool Omni O1 UV printer that will allow items to be placed in parallel with the sides of the small plate. When a print image needs to be aligned with the item it is being printed on, this helps to…
This is an osVAC neo M25 adapter for the Makita DBO180 cordless random orbit sander. I am using a 20mm Mirka hose with this osVAC neo F25-H20 adapter to connect it to my vacuum. Works flawlessly! --- Dies ist ein osVAC neo M25 Adapter für…
A case for the DSO154Pro oscilloscope which removes the base to have a salvaged one use e-cig circular battery (~ 12.9mm) to be secured at the bottom. It reuse the original screws. Also added a bit of a lip to protect the screen.
This was made to help to protect your GoPro Hero10 Bones from crashes. Print it on TPU for best results. Don't forget to read the license. It's NOT for commercial use! Be adviced! Category: Hobby
Adapts the 120mm rails for 140mm fans
Adaptor to Kärcher vacuum systems
Added negative cubes to modify the print for ROG edition O11 XL cases. I used the same print settings as recommended in the original. No supports needed. Made in Orca slicer, if that matters.
Case for Oszilloscope Kit DSO138 including Pushbuttons and Stand. Based on this Thingiverse Model . Model kit from HERE .
Moved to Printables from Thingiverse (original here: https://www.thingiverse.com/thing:4923606 ) This is an external HDD fan shroud for the Lian Li O11D XL ATX Computer Case, also known as the O11 Dynamic XL or PC-O11D-XL. The Hard Drive…
For our vitamin supplements, I wanted small containers to sort into daily portions. I drink a lot of soda from 2 litre bottles and was looking for a use of the caps that are frequently discarded. Using the thread model from Terahurts3D…
Picked up a DSO152 Oscilloscope and it came in a box; here's a nice way to keep it. This one is large enough to hold the “deluxe” version with the nicer probe, so if you skipped that, you could probably shrink this down quite a bit. You…
Based on the plate from https://www.thingiverse.com/thing:5078920 I designed a holder for Corsair commander pro, light node and RGB fan hub. Fit perfect on Lian Li o11 mini. The photo from cura is for setting the support blocker, you need…
Support pour rabot Bosch GHO12V Bosch GHO12V plane holder Print Settings Printer: FLSun Q5 Rafts: Yes Supports: No Infill: 50% Filament: GT 3D Makers PLA Category: Machine Tools
I updated the back of the Scope stand to include a 9V battery. The front part comes from https://www.thingiverse.com/thing:959009 Category: Electronics
Simple tool for removing the lens of a GoPro Hero11. I only have the 11 but I'm guessing it works with others. The lens dimensions are 32mm x 32mm, so anything with those dimensions should work. Prints easy with no supports. If you like…
A circular Vancouver Canucks logo. I did two filament changes to get the three colors. I used Tinkercad to make the stl.
Remixed gamble604's case for the skr pro on my MPCNC. added a couple of fans and made a logo lid for it using the V1 Engineering logo. I printed the case in PETG and the lid in PLA since I was out of red PETG. Print Settings Printer…
Lee Pro1000 3-hole turret wall mount. Printed at 0.2mm layer height 40% infill PLA should be fine!
This is a modification based on the Lian Li Additional I/O Kit that allows the Startech USB 3.0 Internal Multi-Card Reader to be added to the Lian Li O11 Dynamic EVO case. Remove the metal shell from the Startech card reader and install…
I made a little stand for my Funko Pop Jollibee guy. You could mount pretty much anything on it that's similar size. It sits inside the original Lian Li PC-O11 Dynamic midtower case above the Der Baur badge in the back. The mounting holes…
This design is a mount for the small 2.4GHz T-antenna of an ExpressLRS receiver. Similar to my other design: TBS SourceOneV3 ExpressLRS The holes for the standoffs have a diameter of 5mm and the distance between them is 22mm.…
Use four M2 nuts and press them into the holes from the inside before installing the camera with two m2 screws. You can download the Synthara frame here:…
Vent covers to help direct cold air to components and hot air out of my Lian Li Dynamic Evo computer case. This case has hexagon vent holes and since Lian Li is awesome they share the full CAD model on their page . Ctrl+F and search for ‘…
Halterung für die Corsair XD5 Pumpe im Lian Li PC-O11DX Dynamic Midi-Tower In 2 verschiedenen Größen h=60mm und h=93mm Lochabstand für Befestigung im Gehäuse 80mm x 80mm Bracket for the Corsair XD5 pump in the Lian Li PC-O11DX Dynamic…
I printed the parts from PETG with the following settings: - Line width: 0.45mm - Number of outer perimeters: 4-5 - Number of bottom layers: 5 - Number of top layers: 5 - Infill: 15% - 20% The assembly requires the following components: -…
Thanks for supporting me: Patreon: https://www.patreon.com/dm4ds Paypal donation: https://www.paypal.com/paypalme/dm4ds BMAcoffee: https://buymeacoff.ee/dm4ds Bitcoin: bc1qf426e46h6kdtmws4cjnu6wa3wtzy8qvctq9j9u Etherium:…
Description An improvement of the original model by Peťas . Did one because I urgently needed some more or less rigid enclosure for my DSO138 and had very little colored plastic for the labels. Also added a light guide for the trigger…
you'll need two of the things - they are exactly mirrored. had to cut it based on the build volume of my genius. a little CA glue in between them, two screws to the bottom of the case, two screws to the middle fan. works like a charm :)
This particular portable AC model is quite rare as it seems to be a Costco exclusive and whilst Meaco do have other 12k Pro portable models they all seem to slightly differ to this. There's very little information about this model online,…
