Bottles for use with PCO1881 caps
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bottles of 7 different sizes, without caps. Designed for re-use of the caps typically found on 2 litre PET soda bottles.
- Ocena
- 0 / 5
- Polubienia
- 16
- Pobrania
- 105
- Wydruki
- 0
- Wyświetlenia
- 481
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
For our vitamin supplements, I wanted small containers to sort into daily portions. I drink a lot of soda from 2 litre bottles and was looking for a use of the caps that are frequently discarded. Using the thread model from Terahurts3D (cults3d.com), I designed and attached bottles. For our own use, I printed two batches of the smallest version, one plain batch, and the other batch with a color stripe. While I was at it, I configured other sizes that might be useful.
The bottle walls are .8mm thick for two passes of a .4mm nozzle.
I printed in Bambu Studio, PETG with:
- .2mm layer height
- aligned seams
- arachne wall generator
- 10 wall loops (this really makes model solid throughout)
- concentric top and bottom surface patterns
- variable layer height
- no supports
- auto generated brim
NOTE: these ARE NOT waterproof in the manner I designed and printed them. For our use it was not a requirement.
--------------------------------------------------------------------------------------------------------------
Bottle sizes are embedded in the filenames, ie…
Soda Cap Bottle 1_50T 1_25ID
= 1.50" tall (excluding threaded neck) and 1.25" inner diameter