Stick End M4
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Aggressive Wide-Edge Stick Ends – M4 Thread
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
A high-grip variant of the M4 RC stick ends featuring pronounced, wide-edged sharp ridges. The broader faceted geometry provides maximum lateral bite and tactile feedback across a larger surface area, keeping your fingers locked in place during rapid stick transitions—ideal for hybrid pinch and pinch grip styles.
Recommended Print Settings:
Nozzle: 0.2 mm strongly recommended (crucial for clean M4 threads and crisp, defined outer edges)
Material: PETG (optimum impact resistance, weather durability, and layer strength)
Orientation: Flat base on the build plate, edges pointing up
Layer Height: 0.08 mm – 0.12 mm
Perimeters / Walls: 4
Infill: 100%
Supports: None needed
Installation:
Designed for standard M4 gimbal shafts (RadioMaster TX16S, Boxer, etc.). Thread it down straight and slowly on the first install to let the metal shaft tap cleanly into the PETG, or run an M4 hand tap through the hole beforehand for an effortless fit.