Stick End M4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Aggressive Wide-Edge Stick Ends – M4 Thread
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 3
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A high-grip variant of the M4 RC stick ends featuring pronounced, wide-edged sharp ridges. The broader faceted geometry provides maximum lateral bite and tactile feedback across a larger surface area, keeping your fingers locked in place during rapid stick transitions—ideal for hybrid pinch and pinch grip styles.
Recommended Print Settings:
Nozzle: 0.2 mm strongly recommended (crucial for clean M4 threads and crisp, defined outer edges)
Material: PETG (optimum impact resistance, weather durability, and layer strength)
Orientation: Flat base on the build plate, edges pointing up
Layer Height: 0.08 mm – 0.12 mm
Perimeters / Walls: 4
Infill: 100%
Supports: None needed
Installation:
Designed for standard M4 gimbal shafts (RadioMaster TX16S, Boxer, etc.). Thread it down straight and slowly on the first install to let the metal shaft tap cleanly into the PETG, or run an M4 hand tap through the hole beforehand for an effortless fit.