Lily58 Split Keyboard Display Stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Easy to print and space saving stand for your Lily58
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
Modeled in FreeCAD (attached) and latest version can be found here.
Attached files use the following parameters (purple print in the photos):
Parameter | Value | Desc |
|---|---|---|
HasFeet | no | Disables feet location on the bottom |
StandAngle | 15.0° | Tilt angle |
StandWidth | 120.0 mm | |
WallWidth | 3.0 mm | Width of the three walls |
KeyboardHeight | 28.0 mm | |
OverlapInStand | 20.0 mm | How much the pointy tips of the keyboard halves overlap |
The transparent model is an older, larger version and the base for the parametric one.
I printed it with the bottom flat on the print plate, no supports needed.
Transparent one is Extrudr Basic PLA Transparent with 5% infill and it worked well but variable layer height messed up the front.
Purple is printed with Elegoo PLA with 0.20 BALANCED stock.
Have fun.