Lily58 Split Keyboard Display Stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Easy to print and space saving stand for your Lily58
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 1
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Share Alike
Modeled in FreeCAD (attached) and latest version can be found here.
Attached files use the following parameters (purple print in the photos):
Parameter | Value | Desc |
|---|---|---|
HasFeet | no | Disables feet location on the bottom |
StandAngle | 15.0° | Tilt angle |
StandWidth | 120.0 mm | |
WallWidth | 3.0 mm | Width of the three walls |
KeyboardHeight | 28.0 mm | |
OverlapInStand | 20.0 mm | How much the pointy tips of the keyboard halves overlap |
The transparent model is an older, larger version and the base for the parametric one.
I printed it with the bottom flat on the print plate, no supports needed.
Transparent one is Extrudr Basic PLA Transparent with 5% infill and it worked well but variable layer height messed up the front.
Purple is printed with Elegoo PLA with 0.20 BALANCED stock.
Have fun.