1 / 2
Clik Pump Adapter Lanyard Tether — zdjęcie 1
1 / 2

Clik Pump Adapter Lanyard Tether

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A plastic ring with a hole for a lanyard or string to keep the Clik valve adapter attached to the pump head.

Ocena
0 / 5
Polubienia
0
Pobrania
3
Wydruki
0
Wyświetlenia
33
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Need to keep the Clik valve adapter attached to the inflator so you don't loose it, but also need to be able to remove it for inflating Presta and Schraeder Valves? The solution is a plastic ring with a hole for a lanyard or string to keep the Clik valve adapter dangling from the pump head when not in use.

The Schraeder 8v1 threads are modeled in. Printing with a 0.12 layer height, I was able to thread this on with some effort without needing a tap to chase the threads.

I had a device wrist lanyard in the junk drawer that worked perfectly. The hole is modeled at 1.2 mm, so a section of shifter cable could also fit.

Tagi