1 / 2
Clik Pump Adapter Lanyard Tether — image 1
1 / 2

Clik Pump Adapter Lanyard Tether

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A plastic ring with a hole for a lanyard or string to keep the Clik valve adapter attached to the pump head.

Rating
0 / 5
Likes
0
Downloads
3
Makes
0
Views
33
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Need to keep the Clik valve adapter attached to the inflator so you don't loose it, but also need to be able to remove it for inflating Presta and Schraeder Valves? The solution is a plastic ring with a hole for a lanyard or string to keep the Clik valve adapter dangling from the pump head when not in use.

The Schraeder 8v1 threads are modeled in. Printing with a 0.12 layer height, I was able to thread this on with some effort without needing a tap to chase the threads.

I had a device wrist lanyard in the junk drawer that worked perfectly. The hole is modeled at 1.2 mm, so a section of shifter cable could also fit.

Tags