1 / 4
Stax L-series audeze headband adaptor — zdjęcie 1
1 / 4

Stax L-series audeze headband adaptor

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

If like me you wish for a better headband for your L series Stax earspeaker, here is a model that can be used to adapt…

Ocena
0 / 5
Polubienia
0
Pobrania
0
Wydruki
0
Wyświetlenia
19
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial

If like me you wish for a better headband for your L series Stax earspeaker, here is a model that can be used to adapt an Audeze headband for your Stax. My only advice is that this is printed with very high resolution as the tolerances are very small, although you could sand where needed, I would recommend hardened resin printed on a SLA/DLP printer, at the very least make sure the part that meets the headband is printed solid as this is the weakest point.

If using thick pads I recommend the thick pad version of this model to make sure the cups align flat with your head.

Category: 3D Printing

Tagi