Stax L-series audeze headband adaptor
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
If like me you wish for a better headband for your L series Stax earspeaker, here is a model that can be used to adapt…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 19
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
If like me you wish for a better headband for your L series Stax earspeaker, here is a model that can be used to adapt an Audeze headband for your Stax. My only advice is that this is printed with very high resolution as the tolerances are very small, although you could sand where needed, I would recommend hardened resin printed on a SLA/DLP printer, at the very least make sure the part that meets the headband is printed solid as this is the weakest point.
If using thick pads I recommend the thick pad version of this model to make sure the cups align flat with your head.
Category: 3D Printing