JBL L65 L100 L300 4333 4343 4344 4350 and more Speaker Grill Pegs
Printed on Elegoo Neptune 3 Plus
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
- Downloads
- 151
- Likes
- 7
- Rating
- 0
Counting matching models…
Printed on Elegoo Neptune 3 Plus
Print approx. €0.11–€0.14 excl. taxPreliminary estimate for one variant
Own a piece of automotive history with this 3D printable STL model of the Mercedes-Benz SL300. This classic car replica is perfect for automotive enthusiasts looking to display timeless design and elegant engineering in their collections…
Model of a Sl300 made from a 3D Scan. Modified for FDM Printers watertight Layerhight: 0.15 - 0.2 Material: PLA Infill: 10% Supports: yes
Print upside down laying on the roof without supports.
L300 CarPlay unit made for Honda cb1000r printed in PETG The model use the OE screws and rubbermounts The model i made to make a slick mount that look almost OE and is as minimal as possible 4x 5mm nuts 4x 5x30mm bolts the carplay unit i…
Case for the WEL3005 electronic load module with 4mm banana plug sockets and XT60 connector mount. The load module itself can be powered from an USB-C PD Breakout module such as https://de.aliexpress.com/item/1005004386869398.html
Navigation bar mount for EKIY MTC-14 (same as EKIY L300) Carplay / Android Auto head unit. You can use it to attach head unit to 22mm navigation bar or handlebar of the same size. You would need following fasteners: 4x M3x5 or M3x6 heat…
About model Optimised and prolonged inner handle for Mitsubishi Delica's sliding doors. Made for a friend's offroadsafari.cz orange Delica. ASSEMBLY ! You need to put your original steel nut into plastic insert first, rounded side in.…
Print requires supports. The defaults in orcaslicer seem to work.
You can reuse the original 4 screws and rubber gaskets. Hardware you need: - 2 x M4 Nuts - 2 x 35mm M4 bolts
I wanted to make a mount for the Maglite ML300LX Flashlight just for fun. Parts needed: 1x 35mm m3 bolt, 1x m3 nut, 2x Standard Zip Ties, 1x Maglite ML300LX flashlight. I would print 2 because the flashlight is very heavy. Printer I used…
About model Modified design of a model which can be found on Thingiverse. Compatibility Should fit to Delica, L300, L400 (1986 - 2004) Print info It's an harder print , due to stability issues of thin walls untill they are connected with…
Maglight holder for: Mini maglite AA ML300L D-Cell Infill 30% PLA
a cover for the rotating part of the LL300 spectra laser
I made a rear view mirror mount for my Mitsubishi Delica. The diameter of the ball for fastening is 14mm. This is a trial version for now, perhaps it will improve.
Top mount for Rockbros RHL3000 bike lamp. Uses the original plastic part but puts it on the top of the light instead of the bottom. Allows for mounting below handle bar and still using the correct asymmetric light output. Hardware needed:…
Enlarges Brake Pedal. Best printed in ASA. Recommend 40% infill. Should still work in other materials but make sure its good and strong. Secure with a screw or bolt with washer from below.
This model is made for L300Pro M linux navigation, to tighten this i use M5 Allen screw and the screws included with the navigation
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
# # # # # # # # # # # # # DISCLAIMER !!! # # # # # # # # # # # # # UPS IS DANGEROUS. BE CAREFULL, ANY WORK PERFORMED ON UPS SHOULD BE WITH AC POWER AS WELL AS BATTERY UNPLUGED!!! I AM NOT RESPONSIBLE IF YOU INJURE OR KILL YOUUSELVE! This…
Custom holder for Leatherman Supertool300 in it's leather pouch on a pegboard (8mm hole). See my other peg mounted accessories at https://www.printables.com/@Morbier/collections/1571695
Use this yoke with a Howard Leight Honeywell VS130 VeriShield earmuff headband or equivalent. You can purchase the earmuff from Amazon , or only the headband as a spare, if it's available in your country. Bend the springy headband wires…
Use the Beyerdynamic DT1xx Ear Pad with this adapter for your STAX SR-Lxxx Earspeaker.
Tried getting the "SCORPIO" fan duct to fit my Smartrapcore XL300 Tinkercad is as far as my cad skills go. Print Settings Printer: Smartrapcore XL300 Rafts: No Supports: No Resolution: 0.3 Infill: 20% Category: 3D Printing
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
Own a piece of automotive royalty with this 3D printable model of the iconic Mercedes-Benz SL300 "Gullwing". This model flawlessly recreates the distinctive gullwing doors and elegant lines of this classic sports car, expertly sliced for…
Own a piece of automotive history with this 3D printable STL model of the Mercedes-Benz SL300. This classic car replica is perfect for automotive enthusiasts looking to display timeless design and elegant engineering in their collections…
You can reuse the original 4 screws and rubber gaskets. Hardware you need: - 2 x M4 Nuts - 2 x 35mm M4 bolts