EKIY MTC-14 (L300) navigation bar mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
EKIY MTC-14 (L300) Carplay/Android Auto head unit mount for 22mm bar
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 90
- Makes
- 0
- Views
- 376
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Share Alike
Navigation bar mount for EKIY MTC-14 (same as EKIY L300) Carplay / Android Auto head unit.
You can use it to attach head unit to 22mm navigation bar or handlebar of the same size.
You would need following fasteners:
- 4x M3x5 or M3x6 heat inserts;
- 4x M3x20 non-countersunk screws.
I've used PETG-CF due to added stiffness & resistance to elements. ABS, ABS-CF, ASA, ASA-CF, PA12-CF would also do well. Avoid PA6 & PLA due to susceptance to moisture.
Assembly is straightforward:
- print clamp and base parts;
- install heat inserts from the bottom plate side of base part;
- install rubber bushings from original ball mount to the base part;
- fix base part to the head unit (longer bracket side goes to the top side of head unit, see attached photos) with screws from original mount;
- attach and tighten clamp with two screws at the top, orienting the thicker part to the top - so there is a gap below the bar to allow clamp tightening;
- use another two screws at the bottom holes to clamp whole assembly on the navigation bar;
- connect head unit wiring according to user manual & your preference, use acetate cloth electrical tape to wrap wires & fix them on a bike.
If you live in Russia, you can order this mount from me pre-printed and pre-assembled via Avito:
Кронштейн для мотонавигатора EKIY MTC-14 / L300