Kamado Joe Jr. Control Tower for Casting
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Control tower for the Kamado Joe Jr. designed similar to the Kamado Joe Classic II and Big Joe II control towers
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 21
- Wydruki
- 0
- Wyświetlenia
- 632
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
The Kamado Joe Jr. top vent is the standard cast iron daisy wheel, with the vent holes open to the elements. The STLs in this model allow for casting a new control tower that is similar to the Kamado Joe Classic II. The model is split into 4 parts with the following print settings:
Base, Swivel, Cap Vent: Print in PLA/PETG with 15-20% infill. 3 walls, 4 top/bottom layers. Support required for Base (print as oriented) and Cap Vent (flip 180% to print with minimal supports). Printed on the RatRig V-Core 3.
Cap: Can be printed in PLA, but will have a stepped look to the curve, requiring auto body filler and sanding. Best printed on a resin printer (I printed mine on the Elegoo Mars 2 Pro). If printing on an FFF printer, print as oriented.