Kamado Joe Jr. Control Tower for Casting
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Control tower for the Kamado Joe Jr. designed similar to the Kamado Joe Classic II and Big Joe II control towers
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 633
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
The Kamado Joe Jr. top vent is the standard cast iron daisy wheel, with the vent holes open to the elements. The STLs in this model allow for casting a new control tower that is similar to the Kamado Joe Classic II. The model is split into 4 parts with the following print settings:
Base, Swivel, Cap Vent: Print in PLA/PETG with 15-20% infill. 3 walls, 4 top/bottom layers. Support required for Base (print as oriented) and Cap Vent (flip 180% to print with minimal supports). Printed on the RatRig V-Core 3.
Cap: Can be printed in PLA, but will have a stepped look to the curve, requiring auto body filler and sanding. Best printed on a resin printer (I printed mine on the Elegoo Mars 2 Pro). If printing on an FFF printer, print as oriented.