Breg Polar Care Pad Dryer
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
You'll need to print two of these, connect the narrower opening to both pad hoses, make sure it presses the black…
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
You'll need to print two of these, connect the narrower opening to both pad hoses, make sure it presses the black valves down. Snug fit a 1/4 air coupler to one of them.
DO NOT USE HIGH PRESSURE it will tear up the pad, use just a whisper of air (one or two psi). The idea is to let the air circulate a few hours and evaporate the water.
Place the support on the wider opening side so that the surface connecting to the pad is smooth.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
50
Filament: PolyMaker PLA
Category: Household