Breg Polar Care Pad Dryer
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
You'll need to print two of these, connect the narrower opening to both pad hoses, make sure it presses the black…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution
You'll need to print two of these, connect the narrower opening to both pad hoses, make sure it presses the black valves down. Snug fit a 1/4 air coupler to one of them.
DO NOT USE HIGH PRESSURE it will tear up the pad, use just a whisper of air (one or two psi). The idea is to let the air circulate a few hours and evaporate the water.
Place the support on the wider opening side so that the surface connecting to the pad is smooth.
Print Settings
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
50
Filament: PolyMaker PLA
Category: Household