Quick release plate - Shoulder strap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Quick release plate (for cameras and others)
- Ocena
- 5 / 5
- Polubienia
- 208
- Pobrania
- 160
- Wydruki
- 1
- Wyświetlenia
- 3460
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This model is a quick-release lock plate designed for cameras (or any other compatible equipment). It consists of a support plate that securely snaps into its base and requires the push of a button to be released. The base can be mounted onto virtually anything for now, the model is intended to be attached to the shoulder strap of a backpack or similar gear (to always have the camera in an easy to reach place).
Video: https://www.instagram.com/reel/DLxl_rWC49y/?utm_source=ig_web_copy_link&igsi=MzRlODBiNWFlZA==
Printing
The model can be entirely printed in PLA. However, for better durability and performance, more robust materials are recommended.
It also includes two anti-slip pads printed in TPU. These can technically be printed in PLA, but for optimal grip and functionality, TPU is strongly advised.
Additional Components
This model also requires a few non-3D printed parts:
One spring: I used a standard pen spring, which works perfectly. (0.3x4x15mm https://s.click.aliexpress.com/e/_c2zkg8J7)
One screw for mounting the plate to your camera.
Two M4x6x6 or M4x8x6 heat-set inserts.
https://s.click.aliexpress.com/e/_c3bYqKBb
Two M4x25 screws (or any length suitable for your application 25 mm worked perfectly for my backpack setup).
https://s.click.aliexpress.com/e/_c3QesfqN
⚠ Note: Choosing the correct screw length is important, as screws that are too long may protrude and cause discomfort. A protective rubber cap to cover the screws is currently in development ( use correct lenght screws for better results).