Chibi Ankylosaurus - 4-Color / Multi-Color
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Chibi Ankylosaurus - 4-Color Paint Profile (OrcaSlicer / Multi-Color)
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 21
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Action Figures & Statues
- Licencja
- Creative Commons — Attribution
This is a pre-painted multi-color project file (.3mf) for the Chibi Ankylosaurus model. I painted this for a 4-color setup using Silk PLAs and tuned the print settings to achieve clean color boundaries, solid wall strength, and reliable printing.
Note: I am relatively new to multi-color printing (this is only my second multi-color print!), but I've dialed in these settings to get a great result, particularly stabilizing the prime tower so it doesn't topple on taller sections.
Recommended Filament & Color Assignments
Filament Type: Silk PLA
Slot 1: White (Used for eye highlights, support base, and infill)
Slot 2: Black (Used for pupil/eye details)
Slot 3: Gold (Used for back spikes, belly, and accents)
Slot 4: Green (Used for main body/skin and support interface)
Tuned Print Settings
Layer Height: 0.2 mm
Walls: 2 Wall Loops
Segmented Region Max Width: Set to 1.26 mm. This forces 3 outer color wall loops on painted features, which—combined with the 2 internal wall loops—provides strong, solid shell geometry while drastically minimizing required infill density and preventing waste of fancy filament inside the model.
Infill: Set to Filament #1 (White) to avoid using specialized colors internally.
Supports: Tree Supports Enabled
Support Base: Filament #1 (White)
Support Interface: Filament #4 (Green) for clean, matching contact surfaces
Prime Tower: Set to Rib wall type with an expanded brim to increase footprint stability and prevent knocking over mid-print while keeping material usage reasonably low.
Configured For: Flashforge Creator 5 (IDEX / Dual Extruder) & OrcaSlicer
Compatibility: While dialed in on an IDEX printer, the color painting data in this
.3mfwill transfer over cleanly to single-nozzle multi-material systems (like Bambu AMS, Anycubic ACE, or Creality K2) if opened as a project in OrcaSlicer and reassigned to your specific machine.
Original Model:
Remix of the original Chibi Ankylosaurus Figurine by AnimalWorld on Printables.