1 / 2
Chibi Ankylosaurus - 4-Color / Multi-Color — image 1
1 / 2

Chibi Ankylosaurus - 4-Color / Multi-Color

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Chibi Ankylosaurus - 4-Color Paint Profile (OrcaSlicer / Multi-Color)

Rating
0 / 5
Likes
0
Downloads
5
Makes
0
Views
21
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

This is a pre-painted multi-color project file (.3mf) for the Chibi Ankylosaurus model. I painted this for a 4-color setup using Silk PLAs and tuned the print settings to achieve clean color boundaries, solid wall strength, and reliable printing.

Note: I am relatively new to multi-color printing (this is only my second multi-color print!), but I've dialed in these settings to get a great result, particularly stabilizing the prime tower so it doesn't topple on taller sections.

Recommended Filament & Color Assignments

  • Filament Type: Silk PLA

  • Slot 1: White (Used for eye highlights, support base, and infill)

  • Slot 2: Black (Used for pupil/eye details)

  • Slot 3: Gold (Used for back spikes, belly, and accents)

  • Slot 4: Green (Used for main body/skin and support interface)

Tuned Print Settings

  • Layer Height: 0.2 mm

  • Walls: 2 Wall Loops

  • Segmented Region Max Width: Set to 1.26 mm. This forces 3 outer color wall loops on painted features, which—combined with the 2 internal wall loops—provides strong, solid shell geometry while drastically minimizing required infill density and preventing waste of fancy filament inside the model.

  • Infill: Set to Filament #1 (White) to avoid using specialized colors internally.

  • Supports: Tree Supports Enabled

    • Support Base: Filament #1 (White)

    • Support Interface: Filament #4 (Green) for clean, matching contact surfaces

  • Prime Tower: Set to Rib wall type with an expanded brim to increase footprint stability and prevent knocking over mid-print while keeping material usage reasonably low.

  • Configured For: Flashforge Creator 5 (IDEX / Dual Extruder) & OrcaSlicer

  • Compatibility: While dialed in on an IDEX printer, the color painting data in this .3mf will transfer over cleanly to single-nozzle multi-material systems (like Bambu AMS, Anycubic ACE, or Creality K2) if opened as a project in OrcaSlicer and reassigned to your specific machine.

Original Model:

Remix of the original Chibi Ankylosaurus Figurine by AnimalWorld on Printables.