1 / 5
Pouch Dispenser (Pet food etc) Fusion Configurable — zdjęcie 1
1 / 5

Pouch Dispenser (Pet food etc) Fusion Configurable

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A pouch dispenser of my own design made primarily for pet food. Free to configure in fusion360.

Ocena
5 / 5
Polubienia
4
Pobrania
14
Wydruki
1
Wyświetlenia
80
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Kitchen
Licencja
Creative Commons — Attribution

A pouch dispenser of my own design made primarily for pet food.

I also uploaded a f3z file for the design. Its configurable, you can just open the config-table and change whatever you like in fusion360. The config-table is in english but not the underlying parameters. There is also a text you will be able to edit on its front (front_Sketch) with a currently suppressed extrude.

Dimensions inside STL:
Width - 95 mm
Hight - 200 mm
Length - 140 mm

Tagi