1 / 5
Pouch Dispenser (Pet food etc) Fusion Configurable
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A pouch dispenser of my own design made primarily for pet food. Free to configure in fusion360.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 14
- Makes
- 1
- Views
- 83
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
A pouch dispenser of my own design made primarily for pet food.
I also uploaded a f3z file for the design. Its configurable, you can just open the config-table and change whatever you like in fusion360. The config-table is in english but not the underlying parameters. There is also a text you will be able to edit on its front (front_Sketch) with a currently suppressed extrude.
Dimensions inside STL:
Width - 95 mm
Hight - 200 mm
Length - 140 mm