1 / 2
CorrugatedConduitCover 1/2 iD 35mm, oD 41mm
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
1/2 (print two), snap around conduit pipe, ziptie,drill, win.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 33
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
This is v2 with added bewel to the center,
print the center in 70% infill and drill cable holes into it.
Secure with zipties if needed.