1 / 6
Tapa de Cerradura para Maletero de Moto / Motorcycle Trunk Lock Cover (O-ring 1.5mm) — zdjęcie 1
1 / 6

Tapa de Cerradura para Maletero de Moto / Motorcycle Trunk Lock Cover (O-ring 1.5mm)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Funda hermética bisagra, protector cerraduras de maleteros. Tolerancias ajustadas para usar con una junta tórica de 1.5

Ocena
0 / 5
Polubienia
2
Pobrania
6
Wydruki
0
Wyświetlenia
36
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Automotive
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

🇪🇸 ESPAÑOL

Funda protectora con bisagra diseñada específicamente para sellar y proteger la cerradura del maletero de tu motocicleta contra la lluvia, el polvo y la intemperie.

Características del Diseño:

  • Calibración Exacta: El diseño está ajustado con tolerancias precisas para utilizar exclusivamente una junta tórica (O-ring) de 1.5 mm de grosor.

  • Cierre Perfecto: La pared interior de la tapa fue ensanchada matemáticamente para eliminar la fricción entre plásticos. El único freno que sentirás es el "clic" hermético de la goma al sellar.

  • Correa Integrada: Incluye una correa de retención para no perder la tapa al abrir el maletero.

Instrucciones de Impresión:

  • Material recomendado: PETG, ASA o ABS (ideal para resistir el sol y el calor en la moto). El PLA también funciona si no estará expuesto a altas temperaturas.

  • Altura de capa: 0.16 mm o 0.20 mm.

  • Relleno (Infill): 15% - 20%.

  • Soportes: No son necesarios si se orienta correctamente en la base.

  • Hardware extra: 1x Junta tórica (O-ring) de 1.5 mm.


🇬🇧 ENGLISH

Hinged protective cover specifically designed to seal and protect your motorcycle trunk lock from rain, dust, and weather conditions.

Design Features:

  • Precision Fit: The design features fine-tuned tolerances and is engineered exclusively for a 1.5mm thick O-ring.

  • Perfect Seal: The inner wall of the cap was slightly expanded to prevent plastic-on-plastic friction. The only resistance you will feel is the satisfying, hermetic "click" of the rubber sealing the container.

  • Integrated Strap: Includes a retention strap so you won't drop the cover while opening the trunk.

Print Settings:

  • Recommended Material: PETG, ASA, or ABS (for UV and heat resistance on the motorcycle). PLA works if not exposed to high heat.

  • Layer Height: 0.16 mm or 0.20 mm.

  • Infill: 15% - 20%.

  • Supports: No supports needed if oriented flat on the build plate.

  • Extra Hardware: 1x 1.5mm O-ring.

Tagi