1 / 6
Tapa de Cerradura para Maletero de Moto / Motorcycle Trunk Lock Cover (O-ring 1.5mm) — image 1
1 / 6

Tapa de Cerradura para Maletero de Moto / Motorcycle Trunk Lock Cover (O-ring 1.5mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Funda hermética bisagra, protector cerraduras de maleteros. Tolerancias ajustadas para usar con una junta tórica de 1.5

Rating
0 / 5
Likes
2
Downloads
6
Makes
0
Views
36
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

🇪🇸 ESPAÑOL

Funda protectora con bisagra diseñada específicamente para sellar y proteger la cerradura del maletero de tu motocicleta contra la lluvia, el polvo y la intemperie.

Características del Diseño:

  • Calibración Exacta: El diseño está ajustado con tolerancias precisas para utilizar exclusivamente una junta tórica (O-ring) de 1.5 mm de grosor.

  • Cierre Perfecto: La pared interior de la tapa fue ensanchada matemáticamente para eliminar la fricción entre plásticos. El único freno que sentirás es el "clic" hermético de la goma al sellar.

  • Correa Integrada: Incluye una correa de retención para no perder la tapa al abrir el maletero.

Instrucciones de Impresión:

  • Material recomendado: PETG, ASA o ABS (ideal para resistir el sol y el calor en la moto). El PLA también funciona si no estará expuesto a altas temperaturas.

  • Altura de capa: 0.16 mm o 0.20 mm.

  • Relleno (Infill): 15% - 20%.

  • Soportes: No son necesarios si se orienta correctamente en la base.

  • Hardware extra: 1x Junta tórica (O-ring) de 1.5 mm.


🇬🇧 ENGLISH

Hinged protective cover specifically designed to seal and protect your motorcycle trunk lock from rain, dust, and weather conditions.

Design Features:

  • Precision Fit: The design features fine-tuned tolerances and is engineered exclusively for a 1.5mm thick O-ring.

  • Perfect Seal: The inner wall of the cap was slightly expanded to prevent plastic-on-plastic friction. The only resistance you will feel is the satisfying, hermetic "click" of the rubber sealing the container.

  • Integrated Strap: Includes a retention strap so you won't drop the cover while opening the trunk.

Print Settings:

  • Recommended Material: PETG, ASA, or ABS (for UV and heat resistance on the motorcycle). PLA works if not exposed to high heat.

  • Layer Height: 0.16 mm or 0.20 mm.

  • Infill: 15% - 20%.

  • Supports: No supports needed if oriented flat on the build plate.

  • Extra Hardware: 1x 1.5mm O-ring.

Tags