Garmin Bicycle Accessory Rack
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Holds two Garmin devices, heart rate monitor, cycling gloves, sunglasses, cycling shoes and helmet with room to spare
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 35
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution
This mounts to the wall with two drywall screws. Holds two Garmin devices, heart rate monitor, gloves, sunglasses, cycling shoes, helmet, sunglasses. This is a long print and take approximate 350g of filament. I put all the slots & cut outs to save some filament, but takes longer to print because of all the walls. Requires supports, but using trees all the support interfaces will be facing the back. These are the specific garmin adapters I got, https://www.amazon.com/dp/B0B4FTD4T1, but the holes are .86 inches / 21mm apart and I used M3 screws to mount.