Ender 3 Z-Stepper motor bracket. Works with dual leadscrew
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed)
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 69
- Wydruki
- 0
- Wyświetlenia
- 566
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Attribution
A Z-Stepper motor bracket for the Ender 3. No shimming needed. Works with Dual Z (2 required, no mirroring needed)
Print Settings
Printer Brand:
Creality
Printer:
Ender 3
Rafts:
No
Supports:
Yes
Resolution:
200
Infill:
50-100
Filament: Generic ABS, ASA or PETG Black
Notes:
Print with side having the motor connector clearance notch facing down.
Installation:
Attach to stepper motors using M3 x 8mm long screws (4X per mount). Attach to frame using M5 hardware: T-Nuts, M5 X 12mm long screws (2X each per mount). Flat and lock washers recommended under all hardware. Mount so stepper motor rests directly on frame. Slide mount forward/back until leadscrews are parallel with frame upright and tighten M5 hardware to lock in place.
Modeled in FreeCAD (Linux) using data from the open source Ender 3 cad model.
Category: 3D Printer Parts