Cold Steel SR1 Lite Belt Holste
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Compact belt holster for the Cold Steel SR1 Lite folding knife, designed for 50 mm belts. Integrated belt loop, snug fit
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 23
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Cold Steel SR1 Lite – Knife Holster for a 50 mm Military Belt
A compact holster for carrying a closed Cold Steel SR1 Lite folding knife vertically on a 50 mm belt. The integrated belt loop lets you thread the belt directly through the holster without additional mounting hardware.
The design was developed using actual knife measurements and printed fit gauges. Its rounded internal profile has no unnecessary side channel for the thumb stud, which fits within the handle’s overall outline.
Dimensions & Compatibility
Designed for: Cold Steel SR1 Lite
Belt width: 50 mm
Belt loop opening: 55 × 6.5 mm
Internal knife cavity: 41.0 × 16.1 mm
File format: STL
Suggested Print Settings
Material: PETG
Layer height: 0.20 mm
Wall loops / perimeters: 4
Brim width: 6–8 mm
Supports: Not required when correctly oriented
Before Printing
Fit may vary depending on printer calibration and filament. Print the matching fit gauge first, if included, to check the clearance before printing the complete holster.
Before use, check that the knife can be withdrawn comfortably and stays securely seated in the holster.
If you print this model, please share a photo of your make and your feedback!
Tags: Cold Steel, SR1 Lite, knife holder, knife sheath, knife holster, belt holder, 50mm belt, military belt, EDC, outdoor, PETG