Liczymy pasujące modele…
This is my model of the SSV Normandy SR1 from the Mass Effect series. The ship is done in scale with my SR2 . The pieces are divided per their color. For the assembly, I recommend to watch the following video.
XSR 155 - Yamaha XSR155R motorcycle keychain
Designed to make the receiver and antennas a self contained unit to mount in an R/C plane, car, boat, or whatever you want. Assembles with (5) m2 socket head screws. Can be mounted using servo tape or extend screws through base and into…
Gedruckt mit Prusamet PETG, 0.2mm Schichthöhe, Stützen nur auf dem Druckbett, 3 vertikale Konturhüllen, 25% Füllung
Printed in PLA+ 40% infill 0.2mm layer height, add supports to all overhangs and print on the flat side with no text. Or whatever works for you, roughly 2 hours of print time. Modelled using an Action Army 50RND mag, apply firm pressure…
Designed to make the receiver and antennas a self contained unit to mount in an R/C plane, car, boat, or whatever you want. Assembles with m2 socket head screws. Can be mounted using servo tape or extend screws through base and into…
This is a remix of Youpak's mount for the GSB18V, which I really like but didn't fit the smaller GSR12V. Printed in PLA with 20%infill and 3 perimeters.
The rear slides over the hop up adjuster and is open at the bottom so it doesn't interfere with MLOK forward grips. The rear part is held in by the front piece once its screwed onto the barrel thread. You will have to remove the barrel…
Eine Anpassung des “ adapter locking ring max size.stl ” aus dem Perpendicular Drilling Jig von poulanker [Link: https://www.printables.com/de/model/217743-perpendicular-drilling-jig/files ] für den Bosch GSR 12V-35FC. Ich hoffe der Ring…
It is fully printable without supports positioned as it is on the buildplate, however I found the strength and plasticity of the holders in the middle weak and fragile. So I recommend printing it vertically like the one in the pictures.…
I made this because I wanted it. All other ones were either bad, or you needed to pay for them. I am using this in my well MB03 Because of supports there is some cleaning up to do but it all can be done with a knife. Printed upside down…
remix of this beautiful design (only for the replicas with TDC installed) Now the arm is filled completely and can be printed for a better accuracy of the bucking touch surface. Category: Sport & Outdoors
This is a quick print (7min) for a little mount to attach a circular level to a Bosch GSR (EC/Brushless) drill. On the backside of the drill is a M4 thread under a cover which can easily be removed. The circular level has a diameter of…
Steel rail for cargo or just for looking. HAPPY PRINTING!!
I was looking for a M16x1.5 petcock for my Aliexpress fuel tank (I'm building a custom scrambler and the petcock that came with the tank is touching the frame, so I needed a more compact petcock). I found a NSR125 petcock which was…
A simple hex bit holder for possibly anything Bosch that has a ~6mm hole for screw.
As the title states. Standard settings, full-sized Ruger SR1911 grips with custom diamond/circle pattern. Printed in PLA and worked great. Needed a little sanding on the right-side top (safety switch) as the raised texture blocked it from…
I remixed the model of @swiss_beluga to make it compatible to multiboard. Also removed the holes as they are no longer necesary. Print in the orientation of the file.
I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…
side plates for yamaha xsr125 with uk flag
bosch 12v direction selector replacement part
Diese Schwimmerkammerdichtung ist passend für BVF NKJ 12, 13 und 15mm Vergaser mit Zentralschwimmerkammer. Passend für Simson SR1, SR2, SR4-1, KR51 Baujahr 1964, SR4-2 die ersten Baujahre, Tümmler Bootsmotoren mit NKJ Vergaser und…
Das ist das Innenleben für den Schalldämpfer für das Gewehr SR 1000 S. PLA, PETG & TPU möglich. Eine Große Druckkammer um den beginnenden Schall auf zu fangen und weitere kleine um den Schall weiter zu schwächen bevor er austritt. Ist für…
We use a lot of Bosch drills at work. Recently, one broke. It turned out that the ring in the second planetary gear stage had shattered. I made a part that allows the gearbox to bypass that stage and operate just in high gear. If you make…
I made this holder for the BOSCH GSR12V-32 for the SKADIS T-Nut system. It uses M2.5x12 screw to fix the holder to the pegboard.
XM2010 Silencer for VSR10 14mm CCW https://cults3d.com/en/3d-model/game/xm2010-vsr10-stock-by-benen3d For any questions, shoot a mail to [email protected] or via instagram @benen3d. You must ask before making any modifications ! FOR…
Velleman KSR11 constructor spare part, right side. Look on the picture, inside red circle. Print Settings Printer Brand: Creality Printer: Ender 3 Supports: No Resolution: 0.2mm Filament: gembird PLA+ black Category: Mechanical Toys
A far away from perfect anti tip foot. But does the trick. Without the foot I tipped over my drill countless times so I endet up laying it down flat each tipe I put it away between drills. With this stand I finale am able to place it on…
Nachbau von der Original Abdeckung zum SR1 /Simrig.se → Preis Leistung 100%
I have an old NCR (Chenbro?) Computer Case that is sturdy and has good air flow so I'm hesitant to get rid of it. I did, however, need to add a new disk to it and the only place I had room was in one of the 5.25" disk bays. I pulled out…
Hi, this a screen cover for the Voge SR1 ADV 125 scooter. Just print it flat, 3 perimeters
Cold Steel SR1 Lite – Knife Holster for a 50 mm Military Belt A compact holster for carrying a closed Cold Steel SR1 Lite folding knife vertically on a 50 mm belt. The integrated belt loop lets you thread the belt directly through the…
I built this for the novritsch SSG10 but I'm pretty sure it will work on other VSR10 platforms. (let me know if not) It's worked for me for a while with me running an HPA setup. I don't know how it will run with a regular spring setup.…
I made this holder for the BOSCH GSR12V-32 for the SKADIS T-Nut system. It uses M2.5x12 screw to fix the holder to the pegboard.
As the title states. Standard settings, full-sized Ruger SR1911 grips with custom diamond/circle pattern. Printed in PLA and worked great. Needed a little sanding on the right-side top (safety switch) as the raised texture blocked it from…
I have an old NCR (Chenbro?) Computer Case that is sturdy and has good air flow so I'm hesitant to get rid of it. I did, however, need to add a new disk to it and the only place I had room was in one of the 5.25" disk bays. I pulled out…
The adapter can be screwed to the circular saw with a m4 Screw. It fits to a standard vaccum cleaner hose (35/34mm cone). You will need a strip of sticky tape to make a tight seal. No supports needed, print it with the round opening…
I made this because I wanted it. All other ones were either bad, or you needed to pay for them. I am using this in my well MB03 Because of supports there is some cleaning up to do but it all can be done with a knife. Printed upside down…
Exclusive model version with no MT logo.
Designed to bolt into the existing holes in the Extreme Flight 60" Extra NG airframe. Uses M3 socket head screws for the mounting and M2's for the attachments. I've included a photo but not I redesigned the 900Mhz antenna base and I don't…
