BlackBerry Z10 Minimalist Protective Phone Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A precise, form-fitting snap-on protective case designed specifically for the BlackBerry Z10.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 16
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Creative Commons — Attribution — Noncommercial
A lightweight, minimal snap-on cover designed specifically for the BlackBerry Z10. Built to provide baseline scratch resistance and back protection while keeping all edge ports, buttons, and camera openings accessible.
Snug Fit: Precise corner retention keeps the case firmly seated.
Port Access: Generous top, side, and bottom cutouts ensure full access to the power button, volume keys, micro-USB, and Micro-HDMI ports.
Camera Cutout: Raised aperture protects the rear camera module and flash lens when laid flat.
Recommended Print Settings
Material: TPU (recommended for best flexibility/grip) or PETG/PLA (for a firm, rigid snap fit).
Layer Height: 0.16mm – 0.20mm for smooth side walls and clean curves.
Infill: 15% to 20% (Gyroid or Grid).
Perimeters/Walls: 2–3 perimeters.
Supports: Not required if oriented flat on the build plate (back face down).
Brim: Recommended only if using rigid materials like PLA/PETG to prevent minor corner warping.