BlackBerry Z10 Minimalist Protective Phone Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A precise, form-fitting snap-on protective case designed specifically for the BlackBerry Z10.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 0
- Makes
- 0
- Views
- 14
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
A lightweight, minimal snap-on cover designed specifically for the BlackBerry Z10. Built to provide baseline scratch resistance and back protection while keeping all edge ports, buttons, and camera openings accessible.
Snug Fit: Precise corner retention keeps the case firmly seated.
Port Access: Generous top, side, and bottom cutouts ensure full access to the power button, volume keys, micro-USB, and Micro-HDMI ports.
Camera Cutout: Raised aperture protects the rear camera module and flash lens when laid flat.
Recommended Print Settings
Material: TPU (recommended for best flexibility/grip) or PETG/PLA (for a firm, rigid snap fit).
Layer Height: 0.16mm – 0.20mm for smooth side walls and clean curves.
Infill: 15% to 20% (Gyroid or Grid).
Perimeters/Walls: 2–3 perimeters.
Supports: Not required if oriented flat on the build plate (back face down).
Brim: Recommended only if using rigid materials like PLA/PETG to prevent minor corner warping.