Canoe Cup Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Simple cup holder for an Old Town Discovery 133 Canoe
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 9
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
Simple cup holder for an Old Town Discovery 133 Canoe, cup is approximately an 80 mm diameter.
Has two hook styles, a simple clip on and a clamp variant.
The clamp variant requires a hex head M6 bolt and hex nut.
I suggest printing in PETG as it requites a little flexibility to clip on.
The fitment of the hook to the cup is tight on purpose but should still be removable with a little force.
Print the hooks on their sides for strength.
Supports used on the horizontal overhangs. I suggest blocking supports in the two slots on the cup, It's a pain to get in there and remove them.
The Bolt Foot requires threading with the bolt, I suggest holding with foot with pliers or a vice and using either the Knob or a socket to thread it in and out a few times until it bottoms out.
Included .Step files for others to make adjustments.
Printed in PETG
3 Walls
20% Cubic Infill