Canoe Cup Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple cup holder for an Old Town Discovery 133 Canoe
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 9
- Makes
- 0
- Views
- 34
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
Simple cup holder for an Old Town Discovery 133 Canoe, cup is approximately an 80 mm diameter.
Has two hook styles, a simple clip on and a clamp variant.
The clamp variant requires a hex head M6 bolt and hex nut.
I suggest printing in PETG as it requites a little flexibility to clip on.
The fitment of the hook to the cup is tight on purpose but should still be removable with a little force.
Print the hooks on their sides for strength.
Supports used on the horizontal overhangs. I suggest blocking supports in the two slots on the cup, It's a pain to get in there and remove them.
The Bolt Foot requires threading with the bolt, I suggest holding with foot with pliers or a vice and using either the Knob or a socket to thread it in and out a few times until it bottoms out.
Included .Step files for others to make adjustments.
Printed in PETG
3 Walls
20% Cubic Infill