T Puzzle tray with hole
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
T Puzzle remix with a hole in the base that makes the pieces easier to remove.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 18
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Puzzles & Brain-teasers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the “T” Puzzle by andino.
I added a circular hole in the middle of the T-shaped base. You can push the pieces from underneath, making them much easier to remove without turning the puzzle upside down or prying them out. The puzzle pieces and the original challenge remain unchanged. PLA works perfectly for this design. Print the base as it is shipped, with the flat side on the build plate. No supports are needed.
Print settings
Nozzle diameter: 0.4mm.
Layer height: 0.2mm.
Perimeters: 2.
Infill: 5% gyroid.
Supports: none.
Tested with
PLA.
PETG.
Do you like my design? Please leave a like!