T Puzzle tray with hole
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
T Puzzle remix with a hole in the base that makes the pieces easier to remove.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 18
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Puzzles & Brain-teasers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a remix of the “T” Puzzle by andino.
I added a circular hole in the middle of the T-shaped base. You can push the pieces from underneath, making them much easier to remove without turning the puzzle upside down or prying them out. The puzzle pieces and the original challenge remain unchanged. PLA works perfectly for this design. Print the base as it is shipped, with the flat side on the build plate. No supports are needed.
Print settings
Nozzle diameter: 0.4mm.
Layer height: 0.2mm.
Perimeters: 2.
Infill: 5% gyroid.
Supports: none.
Tested with
PLA.
PETG.
Do you like my design? Please leave a like!