1 / 2
SilencedFrosts Printhead - Neptune 4 + & Max with stronger Cartographer mount
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Added additional supports for the cartographer mount from SilenceFrosts upgraded Printhead.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 16
- Wydruki
- 0
- Wyświetlenia
- 111
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Added additional supports for the cartographer mount as a couple of times the mounts snapped off at the end of the support when a print failed and partially printed parts were dragged around the bed.
There are two separate files, one has the supports extending over the mounting holes entirely, the other model the supports stop just before mounting holes.
I had no interference with the full support model and mounting the cartographer + heatset.