More reliable Fairphone 5 Case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
FP5 Case with Triangle Back Structure and PETG On-Off-Button
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 34
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Portable Devices
- Licencja
- Creative Commons — Attribution — Noncommercial
A remix of an existing TPU case for the Fairphone 5.
I removed the hole over the On-Off-Button and instead added a (separately printed) PETG button that can be glued onto the TPU case itself. This should eliminate the issue of the structure near the On-Off-Button being a weak spot long-term.
Also I used the slicer to print the backside of the case with a triangle structure simply because I think it looks cool :)
Printed using TPU 82a (all I had) and PETG but a harder TPU should work just fine.
I used the triangle infill (obviously) at 30% but different structures should also work.
Unfortunately with my filament and print settings I had some stringing so I recommend testing with increased retraction values.