Victorinox Swiss Army Knife Belt Pouch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Made to hold the Deluxe Tinker and carried on your belt.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 84
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I was curious what it would be like to carry my Victorinox Swiss Army Knife Deluxe Tinker on my belt. I couldn't find any models online to just print so I just made this one on Fusion 360. The holding friction is placed on the knife blade and not on scales so not to scratch them.
I made it in two parts because I wanted to be able to print it with minimal supports and I wanted it to resemble a Kydex pouch.
I used M2 heat inserts and M2 screws but it could be glued together or you can modify it with the .f3d files that I provided.
I added my .3mf file so you can see the print orientation I used along with my settings. I used 3 perimeters and organic supports with PETG.
UPDATE 9/7/26
I wanted the pouch to have the similar geometry as a leather pouch so I redesigned the model.
UPDATE 9/10/26
Added some reliefs for the blade clearance and tweaked some dimensions for a better fit.
Working on a design that will utilize a strap and a snap button next.
UPDATE 9/11/26
Added V2 files that have a strap. I used snap buttons, a 3M screw, and a 3M heat insert.