Victorinox Swiss Army Knife Belt Pouch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made to hold the Deluxe Tinker and carried on your belt.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I was curious what it would be like to carry my Victorinox Swiss Army Knife Deluxe Tinker on my belt. I couldn't find any models online to just print so I just made this one on Fusion 360. The holding friction is placed on the knife blade and not on scales so not to scratch them.
I made it in two parts because I wanted to be able to print it with minimal supports and I wanted it to resemble a Kydex pouch.
I used M2 heat inserts and M2 screws but it could be glued together or you can modify it with the .f3d files that I provided.
I added my .3mf file so you can see the print orientation I used along with my settings. I used 3 perimeters and organic supports with PETG.
UPDATE 9/7/26
I wanted the pouch to have the similar geometry as a leather pouch so I redesigned the model.
UPDATE 9/10/26
Added some reliefs for the blade clearance and tweaked some dimensions for a better fit.
Working on a design that will utilize a strap and a snap button next.
UPDATE 9/11/26
Added V2 files that have a strap. I used snap buttons, a 3M screw, and a 3M heat insert.