1 / 15
Porsche 911 GT3 RS 4.0 (997.2) – Moving Wheels – 1:18, 1:24 & 1:64 — zdjęcie 1
1 / 15

Porsche 911 GT3 RS 4.0 (997.2) – Moving Wheels – 1:18, 1:24 & 1:64

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A detailed, FDM-ready scale model of the 2011 Porsche 911 GT3 RS 4.0, available in three scales. The model features sepa

Ocena
0 / 5
Polubienia
15
Pobrania
90
Wydruki
0
Wyświetlenia
393
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Vehicles
Licencja
Standard Digital File License

Porsche 911 GT3 RS 4.0

A printable scale model of one of the most collectible and distinctive versions of the Porsche 911: the 2011 Porsche 911 GT3 RS 4.0 from the 997.2 generation.

This paid STL package contains three separately prepared versions:

  • 1:18 scale

  • 1:24 scale

  • 1:64 scale

Each scale has dedicated wheel geometry and mounting holes. The smaller versions are not simple automatic reductions of the larger model.

Printed and tested

The 1:24 version shown in the photos was physically printed and tested. The 1:18 and 1:64 versions are included in the download and shown in the slicer preview for scale comparison.

The wheel widths and fit of the 1:24 version were adjusted after physical test prints. The final version uses wider front and rear wheels for better proportions and a more realistic stance.

Included files

Each scale includes:

  • One-piece body with an integrated floor

  • Four separate rims

  • Four separate tires

  • Four separate center caps with simplified Porsche shield details

  • Moving wheel mounting system

The model does not include an interior or opening body panels.

Model features

  • Freely rotating wheels

  • Wider rear wheels

  • Scale-specific wheel and screw dimensions

  • Separate rims and tires for easy multicolor printing

  • Separate center caps hiding the screw heads

  • Simplified Porsche shields on the hood and wheel caps

  • Wheel arches cleared of the floor and axle mounts

  • Chamfered rear section of the floor

  • Reinforced spoiler supports designed for FDM printing

  • Closed spoiler-support openings for improved durability during support removal

  • FDM-friendly geometry prepared for a 0.4 mm nozzle

Required screws

The screws are not included.

1:18 scale

  • Front wheels: 2 × M3 × 16 mm

  • Rear wheels: 2 × M3 × 20 mm

1:24 scale

  • Front wheels: 2 × M2 × 10 mm

  • Rear wheels: 2 × M2 × 12 mm

1:64 scale

  • Front wheels: 2 × M1.6 × 5 mm

  • Rear wheels: 2 × M1.6 × 6 mm

Screw dimensions can vary slightly between manufacturers. Test one wheel before assembling the complete model and do not use longer screws without checking the available mounting depth.

Wheel assembly

  1. Press or glue each rim into the corresponding tire.

  2. Identify the narrower front wheels and wider rear wheels.

  3. Carefully tap the pilot holes in the body by hand using the correct screw size.

  4. Insert the screw through the rim and attach the wheel to the body.

  5. Tighten only enough to remove axial play while keeping the wheel free to rotate.

  6. Check wheel rotation.

  7. Glue the center caps into the rims with the shield facing outward.

Do not use a power driver when threading the body. The holes should be tapped slowly and by hand.

Do not glue the wheels to the mounting points.

Recommended print orientation

  • Body: flat floor directly on the build plate, roof facing upward

  • Rims: inner face on the build plate

  • Tires: printed on their sides

  • Center caps: mounting face on the build plate and shield facing upward

  • Use a 2–3 mm brim for the center caps

In the rim and tire files, the two narrower parts are the front wheels and the two wider parts are the rear wheels.

Suggested FDM settings

  • Nozzle: 0.4 mm

  • Body layer height: 0.16 mm

  • Rims, tires and caps: 0.12–0.16 mm

  • Recommended layer height for 1:64 details: 0.10–0.12 mm

  • Walls: 3–4

  • Top and bottom layers: 5

  • Body infill: 12–18% gyroid

  • Supports: build plate only

  • Suggested support threshold: 50–55°

Check the support preview around the bumpers, mirrors, splitters and rear wing.

Support blockers are recommended under the central floor and inside the axle channels. These areas should remain clear.

Print tolerances depend on the printer, material and calibration. A small test print of one rim, one tire, one cap and the corresponding screw is recommended before printing the complete set in 1:18 or 1:64 scale.

Next model: Mazda RX-7 FD

The next car in this series will be the Mazda RX-7 FD, selected from a suggestion posted in the comments.

Future model suggestions can also be submitted in the comments under my published models.

Tagi