Porsche 911 GT3 RS 4.0 (997.2) – Moving Wheels – 1:18, 1:24 & 1:64
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A detailed, FDM-ready scale model of the 2011 Porsche 911 GT3 RS 4.0, available in three scales. The model features sepa
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 97
- Makes
- 0
- Views
- 415
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Standard Digital File License
Porsche 911 GT3 RS 4.0
A printable scale model of one of the most collectible and distinctive versions of the Porsche 911: the 2011 Porsche 911 GT3 RS 4.0 from the 997.2 generation.
This paid STL package contains three separately prepared versions:
1:18 scale
1:24 scale
1:64 scale
Each scale has dedicated wheel geometry and mounting holes. The smaller versions are not simple automatic reductions of the larger model.
Printed and tested
The 1:24 version shown in the photos was physically printed and tested. The 1:18 and 1:64 versions are included in the download and shown in the slicer preview for scale comparison.
The wheel widths and fit of the 1:24 version were adjusted after physical test prints. The final version uses wider front and rear wheels for better proportions and a more realistic stance.
Included files
Each scale includes:
One-piece body with an integrated floor
Four separate rims
Four separate tires
Four separate center caps with simplified Porsche shield details
Moving wheel mounting system
The model does not include an interior or opening body panels.
Model features
Freely rotating wheels
Wider rear wheels
Scale-specific wheel and screw dimensions
Separate rims and tires for easy multicolor printing
Separate center caps hiding the screw heads
Simplified Porsche shields on the hood and wheel caps
Wheel arches cleared of the floor and axle mounts
Chamfered rear section of the floor
Reinforced spoiler supports designed for FDM printing
Closed spoiler-support openings for improved durability during support removal
FDM-friendly geometry prepared for a 0.4 mm nozzle
Required screws
The screws are not included.
1:18 scale
Front wheels: 2 × M3 × 16 mm
Rear wheels: 2 × M3 × 20 mm
1:24 scale
Front wheels: 2 × M2 × 10 mm
Rear wheels: 2 × M2 × 12 mm
1:64 scale
Front wheels: 2 × M1.6 × 5 mm
Rear wheels: 2 × M1.6 × 6 mm
Screw dimensions can vary slightly between manufacturers. Test one wheel before assembling the complete model and do not use longer screws without checking the available mounting depth.
Wheel assembly
Press or glue each rim into the corresponding tire.
Identify the narrower front wheels and wider rear wheels.
Carefully tap the pilot holes in the body by hand using the correct screw size.
Insert the screw through the rim and attach the wheel to the body.
Tighten only enough to remove axial play while keeping the wheel free to rotate.
Check wheel rotation.
Glue the center caps into the rims with the shield facing outward.
Do not use a power driver when threading the body. The holes should be tapped slowly and by hand.
Do not glue the wheels to the mounting points.
Recommended print orientation
Body: flat floor directly on the build plate, roof facing upward
Rims: inner face on the build plate
Tires: printed on their sides
Center caps: mounting face on the build plate and shield facing upward
Use a 2–3 mm brim for the center caps
In the rim and tire files, the two narrower parts are the front wheels and the two wider parts are the rear wheels.
Suggested FDM settings
Nozzle: 0.4 mm
Body layer height: 0.16 mm
Rims, tires and caps: 0.12–0.16 mm
Recommended layer height for 1:64 details: 0.10–0.12 mm
Walls: 3–4
Top and bottom layers: 5
Body infill: 12–18% gyroid
Supports: build plate only
Suggested support threshold: 50–55°
Check the support preview around the bumpers, mirrors, splitters and rear wing.
Support blockers are recommended under the central floor and inside the axle channels. These areas should remain clear.
Print tolerances depend on the printer, material and calibration. A small test print of one rim, one tire, one cap and the corresponding screw is recommended before printing the complete set in 1:18 or 1:64 scale.
Next model: Mazda RX-7 FD
The next car in this series will be the Mazda RX-7 FD, selected from a suggestion posted in the comments.
Future model suggestions can also be submitted in the comments under my published models.