MTB SunTour Custom Mud Flap/Fender FR and REAR
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mud Flap/Fender specific to the Suntour XCE of my Bolinas Ridge but will work for many.
- Ocena
- 0 / 5
- Polubienia
- 14
- Pobrania
- 22
- Wydruki
- 0
- Wyświetlenia
- 186
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
Added V2, for fatter front tire 2.3in is close to rubbing so this allow it to expand more in the fork, removed one zip tie hole as three on top not needed. Added two zips each side though for the side mount. Slight form redesign. Added 09/12/26 have not tested fitment yet but believe its all good.
Split to parts and color how you wish. Or don't and select 1 color to just have it not have the cat features or lettering. I may at some point just put a version that is plain but for now this is a cool bike addition if you like cats.
Specific to the Suntour XCE but will fit many forks. The Rear I don't recall the internal diameter of the frame but it was made for my Marin Bolinas Ridge. If you get the reference "I'm Tired, Boss" then you know..
It won't protect you from all but it will help keep you a little less wet and a little less muddy.. and they look pretty good compared to most flaps I have seen, but hey that's just me!
I printed in PCTG, for the rear flap use a heat gun to help form the bevels, I made it a little thicker to prevent it from slapping.
If you Print in ASA, definitely don't try to form either without a heat gun or you will risk cracking. Its not as springy/flexible as PCTG
rear Flap is big, Needs to print on H2C or Voron 350 for size example
Feel free to support my work with a coffee donation; your kindness is appreciated!
https://www.paypal.com/donate/?hosted_button_id=SE3FMDDLN9ABY