1 / 4
Elenco AM-550CK AM Radio Kit Housing — zdjęcie 1
1 / 4

Elenco AM-550CK AM Radio Kit Housing

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

A housing for Elenco's AM-550CK AM radio kit to make it a bit more useable than simply the bare board.

Ocena
0 / 5
Polubienia
0
Pobrania
1
Wydruki
0
Wyświetlenia
15
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Electronics
Licencja
Creative Commons — Attribution — Share Alike

A housing for Elenco's AM-550CK AM radio kit to make it a bit more useable than simply the bare board. To get it to fit on your print plate, you may need to split it into multiple parts. I split it in half in PrusaSlicer and used the peg connectors by placing two on the faceplate and four around the sides of the radio body in order to fit it on a MK4S for printing.

I then superglued the halves during assembly after lining up the pegs to make the attachment permanent. It accommodates four M3 screws up to 15 mm in length to secure the faceplate into the body. The screws are intended to be threaded directly into the plastic rather than using threaded inserts since it's not a critical fastener.

This model was created using Fusion 360.

Tagi