1 / 5
Fluke 8010A Multimeter mA Port Fuse Holder/Banana Jack
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A replacement fuse holder/banana jack for the mA port of the Fluke 8010A digital multimeter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 2
- Wydruki
- 0
- Wyświetlenia
- 22
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A replacement fuse holder/banana jack for the mA port of the Fluke 8010A digital multimeter. You will need the metal portion of a banana jack with a flat contact on the other side (I found one such part on DigiKey) and press fit that into the jack. You can then twist lock it into place as a new mA port for the meter.
Print in ASA/ABS at 0.2 mm layer heights with snug supports and a brim if needed for adhesion. Prints best on the rear face.
This model was created using Fusion 360.