ESP32 Cam Mount for Prusa MK3.9/4/S
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
ESP32 Cam mount for Prusa MK3.9/4 series printers to place them on the x-axis as a nozzle cam for monitoring remotely.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 60
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Prusa Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
ESP32 Cam mount for Prusa MK3.9/4 series printers to place them on the x-axis as a nozzle cam for monitoring remotely. This will let you remotely monitor prints over Prusa Connect. It houses the smaller camera and puts them on a plumb adapter for you to install onto a ball joint mounted to the x-axis motor with a spare screw of similar length to the others.
Print in PETG with at least 3-4 walls and 15% cubic infill at 0.2 mm layer height for increased rigidity.
This model was created using Fusion 360.