ESP32 Cam Mount for Prusa MK3.9/4/S
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
ESP32 Cam mount for Prusa MK3.9/4 series printers to place them on the x-axis as a nozzle cam for monitoring remotely.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 8
- Makes
- 0
- Views
- 60
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
ESP32 Cam mount for Prusa MK3.9/4 series printers to place them on the x-axis as a nozzle cam for monitoring remotely. This will let you remotely monitor prints over Prusa Connect. It houses the smaller camera and puts them on a plumb adapter for you to install onto a ball joint mounted to the x-axis motor with a spare screw of similar length to the others.
Print in PETG with at least 3-4 walls and 15% cubic infill at 0.2 mm layer height for increased rigidity.
This model was created using Fusion 360.