Baseus Squareround 4in1 HUB wall mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Wall mount for Baseus Squareround 4in1 HUB. Can be taped or nailed.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 0
- Wydruki
- 0
- Wyświetlenia
- 6
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for Baseus Squareround 4in1 HUB USB3.0 - 4xUSB. Can be mounted to the wall with tape or nails. There are 3 versions of this model:
Regular version - can be printed standing (in this orientation I found it too easy to break it) or flat (in this case with supports)
45 degree version - has an additional chamfer in the back which allows it to be printed rotated 45 degrees; personally I haven't tested whether it is actually possible to print without additional supports
Custom support version - I wanted to experiment with custom supports, it printed without any major problems, but left some 'scarring' on the back
