Baseus Squareround 4in1 HUB wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall mount for Baseus Squareround 4in1 HUB. Can be taped or nailed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 0
- Makes
- 0
- Views
- 5
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Wall mount for Baseus Squareround 4in1 HUB USB3.0 - 4xUSB. Can be mounted to the wall with tape or nails. There are 3 versions of this model:
Regular version - can be printed standing (in this orientation I found it too easy to break it) or flat (in this case with supports)
45 degree version - has an additional chamfer in the back which allows it to be printed rotated 45 degrees; personally I haven't tested whether it is actually possible to print without additional supports
Custom support version - I wanted to experiment with custom supports, it printed without any major problems, but left some 'scarring' on the back
