Pumpkin Popper Keychain - 4 Poppers
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A pumpkin keychain with four poppers you can push through and back. Prints in one piece, no supports, no assembly.
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 25
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Gadgets
- Licencja
- Standard Digital File License
A pumpkin keychain with four poppers you can push through and back. Prints in one piece, no
supports, no assembly.
Four captive plugs in a 2 × 2 grid: each one pushes through its socket, clicks past the lip that
holds it, and pushes back from the other side. Nothing is glued, nothing is pressed in afterwards —
they come off the plate already sitting in place.
48 × 51.9 mm, 16.5 mm tall, about 13 g of PLA. The stem carries the keyring.
The photo is a real print of this file at 100 % scale, orange PLA, straight off the plate.